What Are The Factors that Affect Transient Stability?What Are The Method Of Improving Transient Stability?
Factors that Affect Transient Stability and Method Of Improving Transient Stability
Transient stability is that the ability of a system to bring it to a stable condition after an outsized disturbance.
Factors that affect transient stability
- The post-disturbance system reactance is seen from the generator. The weaker the post-disturbance system, the lower the Pmax will be.
- The duration of the fault clearing time. the longer the clearing time is, the longer the rotor will be accelerated and the more kinetic energy will be gained. the energy that is gained during acceleration will be greater, resulting in it be difficult to dissipate during deceleration.
- The inertia of the generator. With a high value of generator inertia, the rate of change of angle will be slower, and as a result, less energy will be gained during the fault.
- The generator internal voltage(determined by excitation system)and infinite bus voltage(system voltage).The lower these voltages, the lower the Pmax is going to be.
- The generator's internal reactance. If the reactance is of low values, the height power is going to be higher and therefore the initial rotor angle is going to be lower.
- The generator output during the fault. This depends on the fault's location and type of fault.
Factors that Affect Transient Stability
Method of Improving transient stability
- Improved steady-state stability.
- Higher system voltage levels.
- Additional transmission line
- Smaller transmission line series reactance
- Smaller transfer leakage reactance
- Series capacitive transmission line compensation.
- Static var compensators and flexible ac transmission system(FACTs)
2.High-speed fault clearing.
3.High-speed register of the circuit breaker.
4Single pole switching.
5.Large machine inertia, lower transient reactance.
6.fast responding, high gain exciter.
7.Fast valving.
8.Breaking resistor.
Factors that affect transient stability
ট্রান্সিয়েন্ট স্থিতিশীলতা এবং ট্রান্সিয়েন্ট স্থায়িত্ব উন্নতির পদ্ধতি প্রভাবিত করে এমন উপাদানগুলি
ট্রান্সিয়েন্ট স্থিতিশীলতা হ'ল কোনও সিস্টেমের বড় গোলযোগের পরে স্থিতিশীল অবস্থায় আনার সক্ষমতা।
ট্রান্সিয়েন্ট স্থায়িত্বকে প্রভাবিত করে এমন উপাদানগুলি
- গোলযোগ পরবর্তী সিস্টেমের প্রতিক্রিয়াটি জেনারেটর থেকে দেখা যায়। ঝামেলা-পরবর্তী পোস্ট সিস্টেম যত দুর্বল, Pmax তত কম হবে।
- ফল্ট সাফ করার সময়কাল। ক্লিয়ারিংয়ের সময় যত দীর্ঘ হবে, তত বেশি পরিমাণে রোটর ত্বরান্বিত হবে এবং আরও গতি শক্তি অর্জন করবে। ত্বরণের সময় যত বেশি শক্তি অর্জন করবে মন্দনের সময় শক্তির অপচয় ততো কঠিন হবে।
- জেনারেটরের জড়তা। জেনারেটর জড়তার মান বেশি হলে , কোণ পরিবর্তনের হার ধীর হবে এবং ফলস্বরূপ, ত্রুটির সময় কম শক্তি অর্জিত হবে।
- জেনারেটরের অভ্যন্তরীণ ভোল্টেজ (উত্তেজনা সিস্টেম দ্বারা নির্ধারিত) এবং অসীম বাস ভোল্টেজ (সিস্টেম ভোল্টেজ)।
এই ভোল্টেজগুলি যত কম হবে, Pmax ততো কম হবে। - জেনারেটরের অভ্যন্তরীণ রেয়াকটান্স। যদি রেয়াকটান্স নিম্ন মানের হয় তবে উচ্চতা শক্তি আরও বেশি হবে এবং প্রাথমিক রোটর কোণটি কম হবে।
- ফল্টের সময় জেনারেটরের আউটপুট। এটি ত্রুটির অবস্থান এবং দোষের ধরণের উপর নির্ভর করে।
ট্রানসিয়েন্ট স্থায়িত্ব উন্নতির পদ্ধতি
1.উন্নত স্টেডি-স্টেট স্থায়িত্ব ।
- উচ্চতর সিস্টেমের ভোল্টেজের স্তর।
- অতিরিক্ত ট্রান্সমিশন লাইন
- ছোট ট্রান্সমিশন লাইনের সিরিজ রেয়াকটান্স
- ছোট ট্রান্সফার লিকেজ রেয়াকটান্স
- সিরিজ ক্যাপাসিটিভ ট্রান্সমিশন লাইন ক্ষতিপূরণ।
- স্ট্যাটিক ভার ক্ষতিপূরণকারী এবং নমনীয় এসি ট্রান্সমিশন সিস্টেম (এফএসিটি)
2. উচ্চ গতির ত্রুটি মুছে ফেলা।
3সার্কিট ব্রেকারের হাই-স্পিড রেজিস্টার।
4 সিংগল মেরু স্যুইচিং।
5. লার্জ মেশিন জড়তা, নিম্ন ট্রানসিয়েন্ট রেয়াকটান্স
6. যথাযথ সাড়া, উচ্চ লাভ উত্তেজক।
7. দ্রুত ভালভ।
8. ব্রেকিং প্রতিরোধক।
Post Comment